Product ID:INSTANTBOND 113
MSDS Date:07/07/1989
FSC:8040
NIIN:01-090-9320
MSDS Number: BHFDM

Emergency Phone: 718-649-3000

Info Phone: 718-649-3000

Cage: JO919

Telephone: 718-649-3000

Cage: JO919

ETHYL-2-CYANOACRYLATE

CAS: 708-85-0

Fraction By Weight: 95%

ACGIH TLV: 2 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:EYES: MAY CAUSE IMMEDIATE BONDING.
SKIN: MAY CAUSE IMMEDIATE BONDING.
INHALATION: MAY CAUSE
IRRITATION TO MUC OUCS MEMBRANES AND THE UPPER RESPIRATORYTRACT.

First Aid:SKIN: FLUSH W/PLENTY OF WTR-THEN REMOVE CURED ADHESIVE
W/HOT, SOAPY WTR. DON'TMECHANICALLY REMOVE ADHESIVE. EYES: HOLD
LID OPEN & IMMEDIATELY FLUSH W/PLENTYOF WATER-GET MED ATTENTION.
VAPORS ARE LACHRYMATORY. INHALATION: MOVE TOFRESH AIR-GIVE
ARTIFICIAL RESPIRATION OR OXYGEN IF NECESSARY-GET MEDICAL ATTEN-
TION. INGESTION: GET MEDICAL ATTNETION IMMEDIATELY,AS BONDING OF
SKIN OCCURS.

Flash Point Method:SCC
Flash Point:167F/75.00C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, DRY CHEMICAL, AND WATER FOG IF RESULTING
POLYMERIZATIONWILL NOT BE HAZARDOUS.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES OR
INHALATION OF VAPORS.
Unusual Fire/Explosion Hazard:CLOTHS USED TO WIPE UP SPILLS MAY CAUSE
RAPID POLYMERIZATION THAT COULD RESULT IN AUTOIGNITION.

Spill Release Procedures:SMALL SPILLS: WIPE UP W/CLOTH. IMMEDIATELY
SOAK W/WTR. CLOTH MAY AUTO-IGN IF NOT SOAKED W/WTR. LARGESPILLS:
FLOOD AREA W/WTR. REMOVED CURED FILM W/ SCRAPER. WEAR NIOSH
APPROVD RESPIRATR OR SELF-CON- TAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING

Handling and Storage Precautions:STORE IN COOL AND DRY PLACE. KEEP
AWAY FROM HEAT OR OPEN FLAME. USE WITH ADEQUATE VENTILATION.
AVOID CONTACT WITH SKIN, EYES OR CLOTHING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. READ INSTRUCTIONS
CAREFULLY.

Respiratory Protection:UNDER NORMAL USE, NOT NEEDED.
Ventilation:LOCAL EXHAUST SHOULD BE USED TO CONTROL VAPORS IN WORK AREA
BELOW SPECIFIED TLV.
Protective Gloves:POLYETHYLENE GLOVES,NOT RUBBER OR CLOTH.
Eye Protection:SAFETY GLASSES MUST BE WORN
Other Protective Equipment:EYE BATH AND WASHING FACILITIES SHOULD BE
NEARBY.
Supplemental Safety and Health
OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY BE A HEALTH HAZARD.
NOTE TO PHYSICIAN: CYANOACRYLATES CURE INSTANTLY ON SKIN
AND IN EYES. CURED ADHESIVE IS NOT CORROSIVE. IT DOES NOT BOND
WELL TO SURFACE OF THE EYE.

Boiling Pt:B.P. Text:140F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:0.3 @ 68F
Vapor Density:>1
Spec Gravity:1.05 @ 68F
Evaporation Rate & Reference:NA
Solubility in Water:POLYMERIZES IN WATER
Appearance and Odor:TRANSPARENT LIQUID-IRRITATING ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
WATER
Stability Condition to Avoid:HIGH HUMIDITY, HIGH TEMPERATURES, ALKALINE
MATERIALS AND THEIR COMBINATIONS, INCLUDING WATER.
Hazardous Decomposition Products:CO2, CO, OXIDES OF NITROGEN, AND OTHER
UNKNOWN HYDROCARBONS.
Conditions to Avoid Polymerization:CONTAMINATN OF ADHESIVE W/ALKALINE
MATLS, PEROXIDES, OR WTR,W/AN UNCONTROLLABLE RISE IN TEMP & A
BUILDUP OF PRESSURE.

Waste Disposal Methods:INCINERATE, OR SOLID ADHESIVE CAN BE LANDFILLED
INACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE, ANDLOCAL
ENVIRONMENTAL REGULATIONS. DO NOT POUR DOWNTHE DRAIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.